Moisture Meters


IM Series Infrared Multi Analyzer

The IM series is an on-line multi IR wavelength analyzer utilizing infrared absorption technology for measuring product constituent and/or thickness. Signal processing capabilities are built into the compact, Stand-Alone detector unit for easy installation and operation. A maximum of 99 calibration curves can be stored into the detector memory for numerous measurement applications. The detector can be used by itself or connected to a PC/plant control system, as both analog and digital outputs are provided. A remote setting display unit, connectable up to 9 detector units, can be used to set various detecting parameters and also displays measured values.

Up to 10 wavelengths, able to measure 4 constituents, moisture, film-thickness, organic properties, and coating-thickness in real time.
Communicate with multi interface, RS-485 (MODBUS), Ethernet (LAN) (option)
High-speed (28ms) & High-repeatability.
Multi-calculation function.
Self-diagnostic function, easy maintenance.
Conforms to CE standards and IP-65.



Mirror Type
Model Specification
IRMA1100 Universal moisture
IRMA1200 High moisture
IRMA1300 Micro moisture
IRMA51-- Multi-component (NIR)
IRMA52-- Multi-component (Thin-film, Infrared)
IRMA7100 Thickness, coating (NIR)
IRMA7200 Thickness, coating (Thin-film, Infrared)
Fiber Type
IRMA2100 Universal moisture
IRMA2200 High moisture
IRMA61-- Multi-component
IRMA8100 Thickness, coating




Measuring system Infrared absorption type
Measuring wavelength Up to 10 wavelengths
Measuring scope Up to 4 constituents
Source of light Tungsten lamp
Measuring distance and measuring diameter ⬚30/200mm or ⬚50/300mm
Output signal 1) Analog signal: 4 to 20mADC; ±0.2% of full scale (Load resistance: less than 500)
2) Communications signal: RS-485 MODBUS (STD)
3) Ethernet (LAN)
Output renewal cycle 28ms
Display & setting LED display shows the measurement data and setting value. Various parameters are settable by keypad.
Computing function Ratio calculation for 2-color or 3-color, and multiple regression calculation.
Calibration curve number up to 99 curves
Calibration curve Linear, quadratic, cubic and multiple regression line.
Calibration curve correction: Linear & quadratic
Smoothing 0 to 99 seconds, optional setting
Calibration By checking plate
Setting detector number Use multi-head then set the detector number by keypad
Setting channel number Set calibration curve number by keypad
Self-diagnostic function Display and output alarm by digital communications and/or contact signal
Input correction Corrects the measured data by external 4 to 20mA DC (1 input)(sample temperature correction, etc.)
External Di/o Di(contact input), selectable from preset, data-hold, real/ smooth functions.
Do(contact output), selectable from self-diagnostic function (1b) or upper/ lower limit alarm (1a).
Ambient temperature range 0 to 50 °C (air cooling is necessary for higher than 45°C)
Power supply 24V DC
Power consumption Approx. 30VA
Connection Terminals connection
Casing Aluminum casing, drip-proof structure (conforming to IEC529, IP65)
Weight Approx. 4.3kg
Mounting Suspension the analyzer uses 4-M8 bolts.
CE-marking specifications EN61326+A
Analog output RS-485, Connectable with max.9 detector units
Analog output 1) Analog signal: 4 to 20mADC; 2 output*
(Load resistance: less than 500)
* In the case of multi-head, output from No.1 and No.2 connected detectors.
2) Communications signal: specified from RS-232C, RS-422A or RS-485.
Output scaling By numeric key
Output renewal cycle Communications output: 28ms ´ detector number
Display 1) Measured data, LED 5-digit
2) Head No., CH. No., parameter.
Setting detector number Set detector head No.1 to No.9 by key
Setting channel number Set calibration curve number by key
Smoothing time T=0.1 to 99.9 seconds
Calibration After output checking plate inserted, calibrate by key or external contact.
Hold/preset Hold or preset the display and output by key or external contact.
Calibration curve correction Corrects the calibration curve online or linear, quadratic correction.
External setting Head number, CH. No., Calibration Hold, Preset.
Alarm function Contact 1 output (HCL) outside of setting-range
Self-diagnostic Contact 1 output
Power supply 100 to 240V AC 50/60Hz
Power consumption max. 15VA
Working ambient temperature 0 to 50°C
Casing ABS resin (IP65)
Mounting Panel-mount type
Weight Approx. 0.6kg
Measuring distance and measuring diameter with lens: f25/25mm to f40/100mm
without lens: f20/15mm to f50/50mm
Fiber length Standard 1.5m, Max.5m (Reflection type fiber)
Standard 2m, Max.10m (Transmission type fiber)
Fiber protection Stainless steel snake tube
Minimum bending radius R100mm
Working temperature range 0 to 150°C
Purge air flow with lens: non air purge
without lens: 5 to 20NL/min
Accessory Vertical mounting holder, Flange holder



Main Screen
Displays measured data, trend and alarm value. Displays 4 constituents on one screen. Save data into specified folder, enable to search or read historical data.

Create the Calibration Curve
Creates the calibration curve for new sample, and transmits the calibration curve data to detector.

PS Sheet IM series PSE-605 Download
Instruction Manual (IRMA1100,1200,1300) IM series INE-471-P5CE Download
Instruction Manual (IRMA2100,2200) IM series INE-472-P5CE Download
Instruction Manual (IRMA5100,5200) IM series INE-475-P4CE Download
Instruction Manual (IRMA6100) IM series INE-476-P4CE Download
Instruction Manual (IRMA7100,7200) IM series INE-473-P2CE Download
Instruction Manual (IRMA8100) IM series INE-474-P3CE Download
Instruction Manual IRGMEG3 INE-529-P0 Download
Leave a feedback